Programmable Universal Verbaliser 1/8 DIN Panel Meter

The new UV1000-PM universal verbaliser is an innovative panel meter that can verbalise and display process signals 0 to 10 Vdc, 0 to 20 mA or 4 to 20 mA, and Type J, K, T, and R thermocouple signals. You can configure/program the verbaliser through the friendly PC user interface software to specify the input range, display decimal point, analog input scaling, audible engineering unit, and high/low alarm set point. Select from over 100 engineering units while configuring the verbaliser. The front buttons allows the user to select different inputs, command/continuous talk, and adjust volume. The UV1000-PM is a creative solution for process monitoring almost any type of measurement with speech/display/alarming.	Short demonstration video of the Universal Verbaliser
SPECIFICATIONS Display Range: -999 to 9999 counts (highest display resolution mode -9.99 to 9.999, Automatically shifts the decimal point right or left depending on the process value of the meter) Verbalise (Speech) Range: ±9999 counts (highest speech resolution mode -9999.999 to 9999.999 counts) Command/Continuous Talk: Command/continuous speech mode selection from the button Volume Control: Set via front buttons keypad, 8 levels at 4 dB intervals Color Change LED Display: Three color change LED display; GREEN (normal operation condition), AMBER (in TC open or overrange condition) and Red (in alarm condition) Display Decimal Points Auto Shifting: Automatically shifts the decimal point right or left depending on the process value of the meter on the LED display within your selected decimal point Relay Outputs: 2 Form C (SPDT) relays, 250 Vac or 30 Vdc @ 3A (resistive load) Power Input: 90 to 240 Vac, 50 to 400 Hz 110 to 375 Vdc, equivalent voltage PC User Interface Software Features: – Selectable talking interval, 0 to 120 sec – Selectable decimal point – Adjustable input offset – High and low alarm settings – Analog input scaling – Change engineering unit-over 100 engineering unit selections – Selectable alarm output dead band Selectable Alarm Deadband: Range 0 to 999 Maximum Recommended Wire Size: 18 AWG Inductive Loads: To prolong relay contact life and suppress interference, it is a recommended engineering practice to use a snubber circuit, such as OMEGA's CNQUENCHARC Input Select Indication: Green LED Alarm Indication: Flash red LED, LED display color changing Speech Sampling Rate: 8 KHz Speaker: Built-in and external speaker, 8 Ω Operating Ambient Temperature: 0 to 50°C (32 to 122°F) Operating Relative Humidity: 0 to 95% RH (non-condensing) Dimensions: 131 L x 96 W x 48 mm D (5.13 x 3.78 x 1.89") Panel Cutout Size: 1⁄8 DIN Weight: 250 g (0.55 lb) NOT INTENDED TO BE USED IN MEDICAL APPPLICATIONS OR USED ON HUMANS