Channel Strip Heater, Ceramic Insulated, 38.1 x 9.53 mm (1 1/2 x 3/8")

CSH5

See All Models Below

A Reliable Heat Source with Seamless Stainless Steel Sheath
Flat Surface Mounting Installations
Used in Hundreds of Industrial and Commercial Heating Applications
Ovens
Hot Plates
Dies
Molds
Drying
Melting
Baking
Incubators
Platens
Food Warmers
Welding Preheating
Air Heating
Sealing Bars
Thermoforming
Tank Heating

Description

Click here if you want to know more about strip heaters.

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No.		Length		Wattage	Watt Density
120V	240V	inch	mm	Wattage	Watt/in²	Watt/cm²
—	CSH00294	7¹⁄₂	190.5	200	19	3
—	CSH00295	9	228.6	500	31	5
CSH00296	—	10¹⁄₂	266.7	250	12	2
CSH00297	—	10¹⁄₂	266.7	400	19	3
—	CSH00298	12	304.8	500	18	3
—	CSH00299	15¹⁄₄	387.4	500	13	2
—	CSH00300	17	431.8	1000	22	3
—	CSH00301	17⁷⁄₈	454.0	350	7	1
—	CSH00302	17⁷⁄₈	454.0	500	10	2
—	CSH00303	18	457.2	1000	20	3
—	CSH00304	18¹⁄₂	469.9	500	10	2
—	CSH00305	22¹⁄₂	571.5	1000	15	2
—	CSH00306	24	609.6	1000	14	2
—	CSH00307	25¹⁄₂	647.7	1000	13	2
—	CSH00308	26	660.4	1600	20	3
—	CSH00309	26¹⁄₂	673.1	1500	18	3
—	CSH00310	30¹⁄₂	774.7	750	8	1
—	CSH00311	31¹⁄₂	800.1	800	8	1
—	CSH00312	35⁷⁄₈	911.2	1000	9	1
—	CSH00313	36	914.4	1000	9	1
—	CSH00314	50	1270.0	1000	6	1
—	CSH00315	62	1574.8	1500	7	1

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR
Note: Part numbers shown are for heaters with T4 Terminals and Mounting Tabs.