Batch Controller

DPF11,DPF12

Batch Controller

^€474,93 DPF11

PLACE ORDER

5 Digit Scaling Factor
Display Rate, Batch Size and (Batch Total or Grand Total)
Second B Relay Programmable for Output at Prewarn or Selected Batch/Grand Total
NEMA-4X/IP65 Front Panel
4-30V Pulse Input - 10 kHz Max. on DPF11
30 mV Magnetic Pickup Inputs on DPF12
4-20 mA or 0-20 mA Analogue Output Output
RS422/RS232 Serial Communication Option
Security Lockout

Instrumentation and Accessories - View related products

Description

The DPF11 miniature batcher is ideal for all batching applications. The display will show Batch Amount, Rate and Batch/Grand Total at the push of a button. The Start and Stop buttons make batching simple.

The DPF11 is a 6-digit totaliser and 4 1/2 digit ratemeter with two relay outputs. One output is dedicated to the Batch Amount (Preset A), the other can be activated for Prewarn or Batch/Grand Total. The unit can count up to the preset (reset to 0) or down from the preset (set to preset). Start, Stop and Reset functions can be activated from the front panel or remote inputs.

An analogue output (assignable for Rate or Batch Amount) is optional

Up to 99 units can communicate to a host computer on a single loop with the RS232 or RS422 communications options .

Specifications
Accuracy: 0.01% FS (±1 display digit)
Display: 6-digit, 14 mm high LED (±1 display digit)
Input Power: 110 Vac ±15%, 220 Vac ±15%, 24 Vac ±15%
Current: 250 mA dc max or 6.5 VA AC
Output Power: (115/230 VAC powered units only) 12 Vdc @ 50 mA, unregulated -10 +50%
Temperature:
Operating: 0°C to 54°C
Storage: -40 to 93°C
Humidity: 0 to 90% RH, non-condensing
Memory: EEPROM stores data for 10 years if power is lost
Approvals: CE approved
Pulse Input: Low = 0-1 Vdc, High = 4 to 30 Vdc 10 kΩ impedance,up to 10 kHz; min 0.05 Hz for rate indication
Mag. Input: 30 mV input, (50V max) signals 10 KΩ imp. 5 kHz max
Output Relays: (2) Rated 5 Amps, 120/240 Vac or 28 Vdc (NC relay contacts and NPN transistor output available with solder jumpers)
Panel Cutout: 92 W x 45 H x 108 mm D
Shipping Weight: 900g

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

DPF11 Series for 4-30V Pulse Input (FLSC-AMP-A may be required)

DPF11-220VAC

€483.68

Availability: 7 weeks

Batch meter 4-30 V Pulse input. 230Vac power

DPF11

€474.93

Availability: 1 week

Batch meter 4-30 V Pulse input. 115Vac power

DPF11-24VAC

€501.62

Availability: 7 weeks

Batch meter 4-30 V Pulse input. 24Vac power

Optional Amplifier for DPF11

FLSC-AMP-A

Consult Sales

Availability:

Low level amplifier for magnetic pick-up type sensors

DPF12 Series for 30mV Input from magnetic pick-up sensors

DPF12-220VAC

€566.26

Availability: 7 weeks

Batch meter. 30 mV input. 230Vac power

DPF12

€587.27

Availability: 7 weeks

Batch meter. 30 mV input. 115Vac power

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR
Note: For RS-232 or RS-422 output, add suffix “-RS232” or “- RS422” to part number
For field-selectable 4-20 or 0-20 mA output, add suffix “-A” to part number. Use table below to order and our sales team will confirm additional pricing