PC-Based Industrial Data Acquisition Systems
Discontinued Products

DI-720/730 Series

See All Models Below

DI-720 Has 32 16 Single-Ended Inputs
DI-730 Has 8 Isolated Inputs (10 mV to 800 Volt Range)
Standard Printer Port, Optional USB or Ethernet Interface
16-Bit Resolution (DI-720)

Description

The DI-720 and DI-730 are no longer available. Please see the OMB-DAQ55/56 series as a possible alternative or contact our Data Acquisition Department.

The DI-720 Series and DI-730 Series are families of instruments that offer high resolution, 250 kHz waveform recording capability. They communicate through your PC's parallel port in EPP, bi-directional, or standard mode. Other optional communications interfaces include USB and Ethernet. Use the DI-720 for general purpose applications where preamplified signals are acquired. Use the DI-730 for wide dynamic range measurements, especially those involving ac or dc electric motors. Examples include paper, aluminum, and steel mills, high speed trains, and rail and seagoing locomotion. The 8-channel DI-730 Series features a measurement range of ±10 mV to ±800 Vdc (or peak ac) over six ranges with ±1000 V channel-to-channel and input-to-output isolation. Replace entire racks of isolation amps, high and low voltage amps, and data acquisition subsystems with one portable, lightweight instrument. The DI-720 Series accepts 32 high-level or signal conditioned analog inputs in a single-ended mode or 16 inputs in a differential input mode. The high-level inputs are typically low impedance, pre-conditioned signals in the range of 1.25 to 10 V. Channel expansion up to 240 channels is possible with expanders.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

DI-720-P

Consult Sales

Availability:

32-channel waveform recording system featuring 16-bit measurement resolution, EPP support

DI-720-EN

Consult Sales

Availability:

DI-720 with Ethernet communications

DI-720-USB

Consult Sales

Availability:

DI-720 with USB communications

DI-730-P

Consult Sales

Availability:

8-channel high voltage waveform recording system featuring channel-to-channel isolation, 16-bit measurement resolution, EPP support

DI-730-EN

Consult Sales

Availability:

DI-730 with Ethernet communications

DI-730-USB

Consult Sales

Availability:

DI-730 with USB communications

DI-705

Consult Sales

Availability:

Screw terminal panel, Plugs directly into DI-720

SWD-WINDAQPRO

Consult Sales

Availability:

WINDAQ/Pro true multitasking waveform recording software for Windows that allows you to display your data in real time and simultaneously record to disk at the maximum rate of the hardware

SWD-WINDAQPRO-PLUS

Consult Sales

Availability:

Identical to WINDAQ/Pro but adds the ability to sample different channels at different rates

† All amounts shown in EUR

PC-Based Industrial Data Acquisition Systems Discontinued Products

DI-720/730 Series

PC-Based Industrial Data Acquisition Systems
Discontinued Products