Temperature and Humidity Data Logger - Discontinued

OM-CP-RHTEMP1000IS-A

Temperature and Humidity Logger

See All Models Below

PLACE ORDER

316 Stainless Steel Enclosure
Compact Design
Fast Response Time
Faster Downloads (1 Minute Full Memory)
Docking Station Communication
Easily Identify Low Battery Voltage

Description

This product has been replaced by the OM-CP-RHTEMP1000IS-A2 which has the same features, price, and is certified to the same Intrinsically Safe standards.

One of the enhancements to the OM-CP-RHTEMP1000IS-A is the stainless steel enclosure with engraved serial number and device name. The device interfaces with the OM-CP-IFC400 docking station or the OM-CP-IFC406 multiplexer data logger interface (sold separately) and can be placed directly into the dock for full communications. No more removal of end-caps to download data. The small size of the OM-CP-RHTEMP1000IS-A allows it to be placed in remote or hard to reach locations. The device now features a battery life indicator allowing users to easily identify low voltage and change batteries when required. This feature maximizes the use of your battery life and is a cost saving efficiency.

The OM-CP-RHTEMP1000IS-A utilizes the latest software. This allows for simple starting, stopping and downloading of collected data. The devices are able to store up to 16,350 time and date stamped humidity and temperature readings in non-volatile solid state memory. Once the readings have been downloaded to the software, it can be viewed in graphic, tabular, and summary form for easy analysis, as well as the potential to be exported into Excel® for further calculations.

Specifications
Temperature
Temperature Sensor: Resistance Temperature Detector (RTD)
Temperature Range: -40 to 80°C (-40 to 176°F)
Temperature Resolution: 0.01°C
Temperature Response Time in Air:
    t63 - 8 minutes to 63% of change
    t90 - 68 minutes to 90% of change
Calibrated Accuracy: ±0.5°C (0 to 50°C)
Humidity
Humidity Sensor: Capacitive polymer
Humidity Range: 0 to 100% RH (non-condensing)
Humidity Resolution: 0.1% RH
Humidity Response Time in Air:
    t63 - 30 seconds to 63% of change
    t90 - 2 minutes to 90% of change
Calibrated Accuracy: ±3.0% RH maximum

General
Start Modes: Software programmable immediate start or delay start up to 24 months in advance
Real Time Recording: May be used with PC to monitor and record data in real time
Memory: 16,350 readings per channel
Password Protection: Yes
Reading Rate: 1 reading every second up to 1 reading every 24 hours
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device Memory Wrap: Yes
Data Format: Date and time stamped °C, °F, K, °R ; %RH, mg/mL, dew point
Battery Life: 2 years typical at 25°C (15 minute reading rate)
Battery Type: 3.6V lithium battery included, user replaceable
Time Accuracy: ±1 minute/month at 25°C
Computer Interface: OM-CP-IFC400 USB docking station or OM-CP-IFC406 multiplexer interface required; 125,000 baud
Software: Windows® XP SP3/Vista/7 and 8 (32-bit and 64-bit)
Operating Environment: -40 to 80°C (-40 to 176°F), 0 to 95% RH (non-condensing)
Dimensions: 42 L x 24.6 mm dia (1.7 x 0.97")
Weight: 65 g (2.3 oz)
Material: 316 Stainless Steel

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

OM-CP-RHTEMP1000IS-A

Consult Sales

Availability:

temperature and humidity data logger

OM-CP-IFC400

€191.98

Availability: In Stock

Docking station (for single data logger) with USB cable, software and manual

OM-CP-IFC406

€876.63

Availability: 1 week

Multiplexer data logger interface (accepts up to 6 data loggers) with USB cable, software and manual

OM-CP-BAT102

€22.27

Availability: In Stock

Replacement 3.6V lithium battery

OM-CP-SVP-SYSTEM

€2,459.53

Availability: 4 weeks

FDA 21 CFR part 11 compliant IQ/OQ/PQ secure software validation workbook and software package (unlimited users, license per computer)

† All amounts shown in EUR
Note: Comes complete with 3.6V lithium battery. Operator’s manual and USB interface cable are included with the OM-CP-IFC400 software/cable package or OM-CP-IFC406 multiplexer (required for data logger operation), sold separately.