IF-001-Series
Modbus compatible USB Serial to Smart Probe Interface
€63,47
IF-001
-
USB Serial to Smart Sensor Interface
-
USB 2.0 Compliant
-
Sync by Omega and Omega Enterprise Gateway support
-
Modbus RTU, Modbus ASCII compatible
-
Integrated Smart Sensor command line interpreter
Description
The Omega IF-001 Smart Interface cable provides an easy way to configure and monitor Omega Smart Probes. The USB 2.0 compliant device appears as a serial port and is compatible with Windows, iOS, and Linux.
The IF-001 provides a Modbus RTU or Modbus ASCII interface to the entire smart sensor register set.
An integrated command line interface allows for quick smart sensor register configuration and monitoring using standard terminal emulators. The 8-pin M12 connector provides 3.3 Vdc power for external Smart Sensor probe with an integrated power monitor to protect against short circuits.
Specifications
Environmental
Environmental Rating: NEMA 6 IP67 when mated (M12 end only)
Operating Temperature: -20 to 80°C (-4 to 176°F), non-condensing
Vibration: 10 Gs at 10 Hz to 500 Hz (M12 end only)
General
Power: USB Powered. Supplies up to 100 mA to sensor
Agency Approvals: CE, WEEE
Setup: Supports USB PnP setup and SYNC configuration software
Interface: USB 2.0
Modbus Smart Interface
| Model Number | Description |
|---|
| IF-001 | Smart Probe USB Interface |
Layer N Smart Probes
Compatible Layer N Smart Probes are integrated with an advanced suite of IIoT Smart Core features. These features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
| Model Number | Description |
|---|
| SP-001-0 | Smart Probe IR, 6:1 field of view |
| SP-001-1 | Smart Probe IR, 6:1 field of view, with discrete I/O |
| SP-002-0 | Smart Probe IR, 10:1 field of view |
| SP-002-1 | Smart Probe IR, 10:1 field of view with discrete I/O |
| SP-003-1 | THB Smart Probe with I/O Tube Housing |
| SP-004-1 | TH Smart Probe with I/O Tube Housing |
| SP-004-4 | TH Smart Probe with I/O Bulkhead Housing |
| SP-005-1 | Temperature and RTD Smart Probe with discrete I/O |
| SP-010-1 | Load Cell Smart Probe with discrete I/O |
| SP-013-1 | Digital Interface Smart Probe with discrete I/O |
| SP-014-1 | Process Monitoring Smart Probe with discrete I/O |
| SP-016-1 | Heat Flux Smart Probe with discrete I/O |
CLOSE
