Wheatstone Bridge In-Line Signal Conditioner

IN-UVI

in-line bridge input transmitter

^€601,75 IN-UVI

PLACE ORDER

Wide Range of Switch Selectable Inputs and Outputs
Input/Output Isolation
5 V or 10 V excitation built-in
8 switch selectable input ranges from 0.5 to 4 mV/V @ 10 V Excitation
Outputs: 4-20 mA, 12 mA Zero ±8 mA, ±5 V, ±10 V, 0-5 V, 0-10 V
Rugged Stainless Steel Enclosure, IP65 Protected
Output can Be Sent Over Much Longer Distances than Millivolt Signals

Accessories - View related products

Description

The OMEGA IN-UVI in-line signal conditioner is housed in a rugged stainless steel enclosure. The bridge input transmitter supplies a highly regulated excitation voltage of 5 or 10 V for the transducer and converts the millivolt signal of the transducer to 0 to 5, 0 to 10, ±5, ±10 Vdc or 4 to 20, 12 ± 8 mA.

The IN-UVI features include a wide zero adjustment range and an isolated shunt calibration relay for quick field setup. All output options and excitation voltages are switch selectable.

Specifications
Supply Voltage: 22 to 32 V dc, isolated from output
Input Current: 90 mA maximum (must be capable of supplying 200 mA)
Voltage Output: ±5 volts, ±10 volts at 2 mA maximum
Output Resistance: 60 Ω
Noise: 10 mV peak to peak @ 3 mV/V voltage mode (10 Vdc) 20 uA peak to peak current mode
Isolation Input to Output: 500 Vdc
    Capacitance: 0.022 µF
    Resistance: 100 MΩ
Short Circuit Protection: Yes +output to -output
Current Output: 4 to 20 mA, 12 mA zero ±8 mA outputs, switch selectable
Maximum Load Resistance: 700 Ω at 20 mA
Response Time: 200 µS (0 to 63%)*
Excitation Voltage: 5 or 10 V, switch selectable
Excitation Max. Current: 30 mA @ 10 V dc
Sensor Input Range: 0.5 mV/V to 4 mV/V in 0.5 steps
Shunt Cal: Yes; remotely activated
Environmental Protection: IP65
Long Term Zero Drift: 0.1%/year
Operating Temperature: -20 to 60°C
Temperature Affects:
    Zero: 0.0018%/°C (0.001%/°F) (Auto zero front end)
    Span: 0.0045%/°C (0.0025%/°F)
Linearity: 0.01%
Adjustment Range:
    Zero: ±30%
    Span: ±20% fine ±40% coarse
Adjustment Location: Behind connector end caps
EMC Affect: <0.1% per en 61326-1 (industrial)
Dimensions: 134.8 L x 34.8 H x 31.2 mm D
Transducer Requirements:
Bridge Excitation: 5 Vdc or 10 Vdc
Bridge Sensitivity: 1 to 8 mV/V @ 5 Vdc EXC, 0.5 to 4 mV/V for 10 Vdc EXC
Bridge Resistance: 350 to 5000 Ω*
* Time constant 0 to 63% (200 µS for a 350 Ω bridge/1.2 mS for a 5 kΩ bridge)

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

IN-UVI

€601,75

Availability: 1 week

Wheatstone bridge in-line signal conditioner

Accessories

M12.8-S-F-FM

€39.37

Availability: 1 week

8-pin M12 straight female connector

Cable Assemblies (all Standard Part Numbers include 24AWG Gauge Conductors, 4.5 metre Length)

CA-4PC24-2A-015-INUVI

€190.90

Availability: 5 weeks

Cable assembly, 4 conductor, PVC insulation, wiring code 2A

CA-4PC24-3-015-INUVI

€190.90

Availability: 5 weeks

Cable assembly, 4 conductor, PVC insulation, wiring code 3

CA-4TE24-3-015-INUVI

Consult Sales

Availability:

Cable assembly, 4 conductor, FEP insulation, wiring code 3

CA-4PC24-4-015-INUVI

€190.90

Availability: 7 weeks

Cable assembly, 4 conductor, PVC insulation, wiring code 4

CA-4PC24-4A-015-INUVI

Consult Sales

Availability:

Cable assembly, 4 conductor, PVC insulation, wiring code 4A

CA-4TE24-5-015-INUVI

Consult Sales

Availability:

Cable assembly, 4 conductor, FEP insulation, wiring code 5

CA-4TE24-6-015-INUVI

€190.90

Availability: 5 weeks

Cable assembly, 4 conductor, FEP insulation, wiring code 6

CA-4PC24-8-015-INUVI

Consult Sales

Availability:

Cable assembly, 4 conductor, PVC insulation, wiring code 8

CA-4PC24-0-015-INUVI

€191.97

Availability: 7 weeks

Cable assembly, 4 conductor, PVC insulation, wiring code 0

CA-4TE24-0-015-INUVI

Consult Sales

Availability:

Cable assembly, 4 conductor, FEP insulation, wiring code 0

CA-6PC24-OUT-015-INUVI

€191.97

Availability: 7 weeks

Cable assembly, 6 conductor, PVC insulation, wiring code OUT

† All amounts shown in EUR
Note: M12 mating connectors are not supplied. Please order separately.
Ordering Example: (1) M12.5-S-F-FM 5-pin M12 connector, €39.37 plus (1) IN-UVI Bridge input transmitter, €601.75 plus (1) M12.8-S-F-FM 8-pin M12 connector, €39.37, €39.37 + 601.75 + 39.37 = €680.49