TWO WAY VALVES Two-way solenoid valves cover most industrial laboratory applications. A two-way valve controls the flow of fluids through a single passage. It has two ports, an inlet (1) and an outlet (2). A normally closed valve does not pass fluid unless it is energized. A normally open valve operates in the opposite manner.
SPECIFICATIONS Wetted Parts: SV-100 Series: stainless steel, copper and seal; SV-200 Series: brass, stainless steel, copper and seal. Medium: Liquid or gases (SV-101-105, 107-113, Filter 40 microns) Max. Static Pressure: 1.5 times max. psid, vacuum (>5 microns ABS) Ambient Temp.: 15 to 150°F (-9 to 50°C) Mounting Pipe mounting, any direction Power: 10 Watts, 120 Vac coils, 50-60 Hz
SPECIAL PURPOSE SOLENOID VALVES For Steam, Hot Water, Anti-Water Hammer, 3-Way, 4-Way and Selectable Service 3-WAY CONTROL A three-way valve is normally used to control larger values; it has an inlet port, an exhaust port, and a common cylinder port. 4-WAY CONTROL A four-way valve has an inlet port (1), two cylinder ports (2 and 4), and two exhaust ports (3 and 5). They are generally used to control double-acting actuators.
SPECIFICATIONS Wetted Parts: SV-200: brass, stainless steel, copper and seal (SV-242 Delrin additional) (SV-271: aluminum, Delrin, stainless steel, copper, and seal) (SV-281,-282, FKM additional). Medium: Liquids or gases Max. Static Pressure: 5 x Max psid Ambient Temp.: 15 to 122°F (-9 to 50°C) Mounting: Pipe mounting, any direction Power: 10 watts, 120 Vac, Class F (PV-231 to 235, 22 watts, 120 Vac Class H)
† All amounts shown in EUR Note: All SV100 and SV200 sereis valves are 110 Vac powered. For 220 Vac power purchase replacement coil separately.