Economical Gas Mass Controllers With or Without Integral Display - Discontinued

FMA5400 and FMA5500

^€2.711,00 FMA5544

PLACE ORDER

NIST Traceable Calibration
Reads and Controls Gas Mass Flow Without Temperature or Pressure Compensation
Available in Economical Aluminum or Corrosion-Resistant 316 SS
Tiltable LCD Display for Easy Reading

Description

The FMA5400 and FMA5500 series has been discontinued. Please see the upgraded FMA5400A and FMA5500A Series as a possible alternative or contact our Sales Department.

The FMA5400/5500 Series electronic gas mass flow controllers provide for controlling the flow of a wide variety of gases from 0-10 SCCM up to 100 SLM. Utilizing heat transfer through a heated tube to measure molecular gas flowrate, the FMA5400/5500 provides measurement of direct gas mass flowrate, without the need to compensate for variations in gas temperature or pressure (within stated limits). They are available in an economical aluminum/brass construction for typical gas flows and a 316 SS construction for applications requiring more corrosion resistance. The FMA5400 series without integral display is supplied with both an analog 0-5 Vdc and 4 to 20 mA output for remote monitoring; the FMA5500 series has both an integral 3-1/2 digit display and analog output. The display is tiltable over 90 degrees for viewing convenience. The display is calibrated standard to read out directly in SCCM or SLM for nitrogen (other gas calibrations available on special order).

The FMA5400/5500 mass flow controllers feature a built-in normally-closed electromagnetic valve for maintaining a constant flowrate regardless of variations in inlet or outlet pressures. The setpoint is controlled either locally via a potentiometer accessible through an access window in the case or remotely via an analog 0-5 Vdc or 4-20 mA signal (field selectable). The FMA5400/5500 series require 12 to 15 Vdc power @ 800 mA maximum, which can be supplied by the FMA545PW wall plug-in socket power supply (24 Vdc power input @ 650 mA is optionally available). The electronics are reverse polarity protected and have a resettable fuse. Model number FMA545C (supplied separately) provides a mating 15-pin “D” connector with 8 feet of shielded cable for accessing the analog output signals and power input connections. The LCD supplied with the FMA5500 series is connected to the lower electronics via a modular plug. The LCD can be remotely located by purchasing an FMA18RC remote cable assembly–you must then build your own assembly for panel mounting the LCD.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

Mass Flow Controllers without Display, Al/Br Body (Use Part Number Builder for 316 SS Construction)

FMA5418

Consult Sales

Availability:

0 to 5 SLM

FMA5423

Consult Sales

Availability:

0 to 15 SLM

FMA5441

Consult Sales

Availability:

0 to 80 SLM

FMA5443

€2,416.00

Availability: 1 week

*0 to 200 SLM

FMA5444

€2,293.42

Availability: 11 weeks

*0 to 500 SLM

FMA5445

€3,043.00

Availability: 8 weeks

*0 to 1000 SLM

Mass Flow Controllers With Display, Al/Br Body (Use Part Number Builder for 316 SS construction)

FMA5544

€2,711.00

Availability: 11 weeks

*0 to 500 SLM

FMA5545

€2,990.37

Availability: 11 weeks

*0 to 1000 SLM, comes with 3/4 FNPT connections instead of compression fittings

FMA5543

€2,552.00

Availability: 11 weeks

*0 to 200 SLM

Accessories

FMA18RC10

€41.98

Availability: 1 week

10 ft cable for remote LCD mounting

FMA18RC25

€70.20

Availability: 11 weeks

25 ft cable for remote LCD mounting

FMA545C

€70.74

Availability: 1 week

Female 15-pin D-connector with 8 ft of shielded cable

FMA545C-10

€73.69

Availability: 11 weeks

Female 15-pin D-connector with 10 ft of shielded cable

FMA545C-12

€82.07

Availability: 11 weeks

Female 15-pin D-connector with 12 ft of shielded cable

FMA545C-18

€85.89

Availability: 11 weeks

Female 15-pin D-connector with 18 ft of shielded cable

FMA545C-25

€103.40

Availability: 8 weeks

Female 15-pin D-connector with 25 ft of shielded cable

FMA545PW

€101.43

Availability: 1 week

Socket plug-in power supply for 115 Vac

FMA545PW-220VAC

€108.84

Availability: In Stock

Socket plug-in power supply for 220 Vac, VDE plug type

† All amounts shown in EUR
Note: Comes complete with NIST certificate, compression fittings, and operator's manual. Power supplies sold separately.

Flow ranges specified are for nitrogen or air at 20 psig inlet (up to 50 SLM0 or 25 psig inlet (60 to 100 SLM units) and 0 psig outlet. when used with other gasses, a multiplication factor is used to determine the flow rate, and the digital display must be rescaled in the field.

To request a custom calibration add the gas abbreviation and inlet pressure/outlet pressure as a suffix to the model number.

Calibrations done at ambient (20C/70F) temperature only.

For 316SS add suffix "ST" to the part number, consult Omega Flow Engineering for cost.

*For units powered by 24 Vdc, add suffix “-24VDC” to model number, no additional cost.

For Oxygen cleaned units, add suffix "-O2CLEAN" to the model number; add $125 to the price.

Ordering Example: (1) FMA545PW Power Suppy for 110Vac, €101.43