Industrial HF-Resistant Alpha pH Electrode - Discontinued

PHE-901-HF - DISCONTINUED

See All Models Below

PLACE ORDER

In-line or Submersion Mount

HF Resistant

10 Feet of Cable

Order Table

Description

Specs

Related Products

Print

Top

Description
The PHE-901-HF model has been discontinued. Please see the -HF option in the PHE-7300 Series as a possible alternative or contact our Flow Engineering Department.

This rugged pH electrode is specially designed for pH determination in samples containing hydrofluoric acid or other acid fluorides. Such samples can cause rapid deterioration of a typical glass pH electrode. This electrode consists of a PVC housing, incorporating a non-glass reference element and a plastic membrane pH sensor. Corrosive acid fluoride solutions will not reduce electrode performance or lifetime. The electrode has a zero potential at 7 pH and can be effectively used on most pH analyzers and controllers. Manual temperature compensation is recommended where required. The electrode is threaded with a 1" MNPT on both ends. The electrode can be installed into a pipe tee for in-line use, or on the end of a 1" FNPT submersion pipe.

Specifications
pH Range: 1 to 8
Temperature: 0 to 50°C
Zero Potential: 7 pH
Maximum Pressure: 50 psi
Body Construction: PVC

Dimensions
Overall Length: 160 mm (6.3")
Fitting Length: 137.2 mm (5.4")
Diameter: 33.04 mm (1.30")
Cable Length: 3 m (10')

† All amounts shown in EUR
Note: PHCN-37 controllers are not compatible with this electrode

Related Products:

PHA-4, PHA-7 and PHA-10
SHOP NOW →
Pre-mixed pH Calibration Solutions