See All Models Below
 
                             
                            
                            Description
Standard features include RS232 communications, LCD, sophisticated cooling system, and software calibration.| Model | PSU301 | PPSU305 | |
| Max Output Power | 30 W | 165 W | |
| Output Voltage | HIGH | LOW | |
| 0 to 15 V | 0 to 30 V | ±30 V fixed 3.3 V/5 V | |
| Setting Resolution | 10 mV | 10 mV | 10 mV | 
| Max Output Voltage | 16 V | 32 V | 32/-32 V | 
| Dual Tracking |  |  | 0 to ±30 V | 
| Tracking Deviation |  |  | ±20 mV | 
| Output Current | 0 to 2 A | 0 to 1 A | 0 to 2.5 A/ 0 to -2.5 A 3 A | 
| Setting Resolution | 1 mA | 1 mA | 1 mA | 
| Tracking Deviation | 2.4 A | 1.2 A | 3 A/-3 A CL = 3.3 A | 
| Dual Tracking |  | 0 to ±2.5 A | |
| Tracking Deviation |  | ±5 mA | |
| Constant Voltage Characteristics (at rated outputs) | |||
| Line Regulation (10% AC) |  | 1 mV 5 mV | |
| Load Regulation (100% Load Change) |  | 2 mV 10 mV | |
| Ripple/Noise rms (10 Hz to 20 mHz) |  | 2 mVrms | |
| Ripple/Noise Peak (10 Hz to 20 MHz) |  | 10 mV p-p 20 mV p-p | |
| Transient Response |  | 200 µs typical | |
| Temp Coefficient |  | ±5 mA | |
| Constant Current Characteristics (at rated outputs) | |||
| Line Regulation (10% AC) |  | 15 mA typical | |
| Load Regulation (100% Load Change) |  | 10 mA typical | |
| Ripple/Noise rms (10 Hz to 20 mHz) |  | 1 mA rms typical | |
| Ripple/Noise Peak (10 Hz to 20 MHz) |  | 5 mA p-p typical | |
| Temp Coefficient |  |  | |
| Display | 16 character x 2 line backlit LCD; front-panel status indicator with beeper | ||
| Voltage Accuracy* | ±0.2% rdg + 2 digits | ||
| Display | ±0.5% rdg + 5 digits | ||
| Display | ±240 Vdc | ||
| Temp Range | Operating: 0 to 40°C, less than 80% RH; Storage: -45 to 75°C, less than 80% RH | ||
| Dimensions (W x H x L) | 221 x 86 x 300 mm | 213 x 132 x 399 mm | |
| Weight | Approx. 4.5 kg | Approx. 8.2 kg | |
| Cooling | Forced air | ||
| RS232 Interface | Standard, port configuration: asynchronous 2400 baud, 8 data bits, 1 stop bit, no parity | ||
| RS232C DCE Interface | 9-pin D-sub connector | ||
| Power 115/230 Vac | 47 to 63 Hz, approx. 250 W | ||