Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
Basket  |  Contact  |  Help  | 
Holland 07077 03815
International+31 (0) 7077 03815
Layer N Banner

Load Cell and strain gauge amplifier/transmitter


Load Cell and strain gauge amplifier | TXDIN1600S

Load Cell and strain gauge amplifier

207,78 TXDIN1600S

  • Load cell or strain gauge amplifier/signal conditioner with selectable Full Scale Outputs of: 0-20 mA, 4-20 mA, 0-10 V ±10 V
  • Input Range -7.6 to +7.6 mV/V max. User Selectable
  • 5 Vdc Bridge Excitation Built-In
  • Contact Closure Input for Remote Tare
  • 0 to 20 Second Input Filter
  • 2 to 6 Point Scaling for Non-linear Inputs
  • 10 or 80 Samples/Second
  • Easy Scaling and Set-Up Via USB and Free Software
Accessories - View related products


Find how signal conditioning works on this link.

Omega's TXDIN1600S is a DIN rail mount amplifier for load cell or strain gauge inputs. Software available for free download allows the user to configure and scale the transmitter easily via a built-in mini USB port. Additionally, the user may read live process data through the software, allowing for offset and span calibration

Outputs can be either voltage, bipolar voltage or active/passive process current. The unit is powered by 10 to 48 Vdc or 10 to 32 Vac and is suitable for battery operation.

The high precision input stage of the device allows for a bridge excitation voltage of 5 Vdc to be used as opposed to the traditional 10V. This reduces the power requirement for the bridge supply and up to four bridges (load cells) may be connected to the input.

Advanced features such as remote tare, multi-point scaling, filtering and built-in bridge excitation make this transmitter suitable for a wide variety of applications.


Full Range: -7.6 to +7.6 mv\V; -38 to +38 mV @ 5V excitation
Type: Four Wire Ratiometric
Drift: < ± 0.05 %
Linearity: ± 0.01 %
Update Rate: Selectable, 10 or 80 SPS (Samples per second)

Voltage: 5 Volts DC ± 0.1 V @ 59 mA
Bridge Impedance: Total 85 to 10000 Ω (operates with four 350 Ω load cells in parallel)

Type: Remote volt free contact, up to 10 metres distance

Current Source: Range 0 to 21.5 mA , Max Load 750 Ω
Current Sink: Range 0 to 21.5 mA , Supply 10 to 30 V dc, Voltage effect 0.2 uA/V
Accuracy: (mA Out/ 2000) or 5 uA which ever is the greater, Drift 1 uA/°C

Range: 0 to 10.1 V or -10.1 to 10.1 V, Accuracy ± 5 mV
Current Drive: ± 2 mA, Min load 5000 Ω @ 10 V

Type: Independent “low” “High” front panel push buttons allow user to manually set low and high output points.

Range: 10 to 48 VDC, 10 to 32 VAC Protected by internal 500 mA resettable fuse.
Power: < 1 W Full Power

Isolation: Supply to input to output 500 V dc.
Indication: LED, Green when output -0.1 to 100.1 %, else red

Type: USB 2.0
Baud rate: 19,200 baud
Equipment: PC running windows XP or later, USB cable.

Calibration Scaling: 2 to 6 points signal against process
Filter: 1 to 20 Seconds to reach 70 % of final value
Tare: Remote set tare offset with programmable user set point.
Active Calibration: Active Calibration against live load cell
Process Units: 4 Characters
Tag Number: 20 Characters
Process Output: Process Output Range
Signal Output: Select type, signal range
Active scaling output: Set output process range against active sensor input
Sensor Information: Model, sensitivity and balance

Operating Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Storage Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Configuration Ambient: 10 to 30 °C
Installation Enclosure: DIN Rail enclosure offering Protection >= IP65.

CE: BS EN 61326

Style: DIN 43880, Colour grey, material Polyimide 6.6
Weight: < 70 grams
Dimensions: 90 mm H x 15.5 mm W x 56.4 mm D
Terminals: 2.5 mm Maximum

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Availability: In Stock
Load cell or Strain gauge amplifier, transmitter and Signal Conditioner. DIN Rail Mount.
Accessories (For details see Related Products links below)
Availability: 7 weeks
USB Cable
Click to expand/minimize a list of what others bought with theLP-PS-1524
Consult Sales  
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
Click to expand/minimize a list of what others bought with theTX4-100
Availability: In Stock
4-Core 7/0.2 mm screened cable white, red, green & black with drain wire, 30 metres
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.