Fluidized Sand Baths

FSB Series

Fluidised Sand Bath

See All Models Below

PLACE ORDER

Fluidised Sand Bath featuring a temperature Range: 50 to 600°C
Safe, Clean, Dry Heat
Burn-Out Protection
Stainless Steel Containers
Inconel-Sheathed Immersion Heaters
Built-in Pressure Switch and Overload Fuse
Rugged, Heavy-Duty, Accurate
Spill Flanges Standard on all Models

Description

Click on this link if you need more information about a calibrator.

When fluidised solids are heated, heat is distributed quickly and evenly throughout the bath and transferred rapidly to objects submerged in the bath. The bath temperature can be adjusted easily to the point at which you wish to calibrate or run a test.

Fluidised sand baths for calibration laboratories provide safe, rapid heat transfer and accurate temperature control, enabling you to efficiently and safely calibrate and maintain temperature sensitive instruments.

The principle of fluidisation occurs when a gas—usually low pressure air or nitrogen—flows upward through a partially-filled chamber or retort of dry, inert particles of aluminium oxide. The gas flows at a low velocity, which sets the particles in motion, separates them, then suspends them to a stable level to give the particles the appearance of turbulence quite similar to the state of boiling liquid.

Besides circulating and flowing like a liquid, fluidised solids exhibit excellent heat transfer characteristics.

Model No.	Temperature Range	Working Volume dia. x depth	Overall Volume dia. x height	Power
FSB-3	50 to 600°C	178 x 139 mm	330 x 457 mm	115 or 240 Vac (Two 750 Watt Heater)
FSB-4	50 to 600°C	229 x 381 mm	381 x 660 mm	240 Vac (Four 1 kW Heaters)

Pressure Regulator
Reduces the pressure of air from an industrial air line to suit the fluidised bath. The Regulator is supplied with a pressure gauge reading from 0 to 30 lb/in2 and a built-in air filter. Specify FSB-P-783.

NOTE: HEAVY WEIGHT - OVERWEIGHT SHIPPING CHARGES APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

FSB-3-240V

Consult Sales

Availability:

Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 230Vac Power

FSB-3

€8,384.90

Availability: 15 weeks

Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 115Vac Power

FSB-4

€11,398.52

Availability: 13 weeks

Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 240Vac Power

Accessories

FSB-A-25

€533.13

Availability: 15 weeks

Replacement Sand - 11kg Aluminium Oxide

FSB-A-100

€905.62

Availability: 9 weeks

Replacement Sand - 45kg Aluminium Oxide

FSB-F-784-A

€192.77

Availability: 1 week

Air Filter

† All amounts shown in EUR