Hot Water Meters for Totalization and Rate Indication with Pulse Output

FTB8000HW Series

^€237,21 FTB8007HW

PLACE ORDER

Flow Rates from 0.22 to 132 GPM
150 psi Maximum Operating Pressure
90°C (194°F) Maximum Operating Temperature
Field-Adjustable Pulse Output (Optional)

Turbine and Paddle Wheel Flowmeters - View related products

Description

The FTB8000HW Series meters use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000HW meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid state, longlasting Hall-effect sensor, which requires power. -PT model meters use a 2-wire reed switch. They provide a dry-contact closure and do not require power. Basic FTB8000HW meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.

SPECIFICATIONS
Materials:
    Body: Cast bronze
    Internals: Engineered thermoplastic
    Magnet: Permanent ceramic
Max Temperature: 90°C (194°F)
Max Operating Pressure: 150 psi
Accuracy: 1.5% of reading
Sensor:
    -PR: Hall-effect device
    -PT: Reed switch
Max Current: 20 mA
Max Voltage:
    -PR: 24 Vdc
    -PT: 24 Vdc or Vac
Sensor Power (-PR): Minimum 6 mA at 12 Vdc
Cable Length: 4 m (12') standard, 600 m (2000') max
Flow Rates (GPM):

NPT Size	¾	1	1½	2
Minimum	0.22	0.44	0.88	1.98
Maximum	22	52	88	132

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

FTB8007HW

€237,21

Availability: 5 weeks

3/4NPT, 0.22 to 22 GPM, total only

FTB8010HW

€392,98

Availability: 1 week

1NPT, 0.44 to 52 GPM, total only

FTB8015HW

€790,00

Availability: 5 weeks

1 1/2NPT, 0.88 to 88 GPM, total only

FTB8020HW

€1.142,00

Availability: 5 weeks

2NPT, 1.98 to 132 GPM, total only

FTB8007HW-PT

€268,35

Availability: 1 week

3/4NPT, 0.22 to 22 GPM, 20 Pulse/gallon

FTB8010HW-PT

€430,17

Availability: 3 weeks

1NPT, 0.44 to 52 GPM, 1 Pulse/gallon

FTB8015HW-PT

€787,97

Availability: 5 weeks

1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon

FTB8020HW-PT

€1.187,00

Availability: 4 weeks

2NPT, 1.98 to 132 GPM, 1 Pulse/gallon

FTB8007HW-PR

€296,49

Availability: 5 weeks

3/4NPT, 0.22 to 22 GPM, 1 Pulse/gallon

FTB8010HW-PR

€486,45

Availability: 5 weeks

1NPT, 0.44 to 52 GPM, 1 Pulse/gallon

FTB8015HW-PR

€917,24

Availability: 5 weeks

1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon

FTB8020HW-PR

€1.308,00

Availability: 5 weeks

2NPT, 1.98 to 132 GPM, 1 Pulse/gallon

† All amounts shown in EUR
Note: Comes with 2 MNPT couplings (already installed), 4m (12') cable, and complete operator’s manual. Only units that have an output signal (-PR or -PT) come with a cable.