Isolation is provided between
input and output and all temperature
ranges are linear to temperature.
Designed for ease of use, our latest
USB interface is fitted for quick and
easy configuration. Just connect a
standard USB cable between the
TXDIN1600 and your PC. Using our
free configuration software, your PC
will automatically upload the existing
configuration data and guide you
through any changes you wish to
make. To further help save time, the
TXDIN1600 does not need to be
wired to a power supply during the
configuration process, it is powered
via the USB interface from your PC.
The TXDIN1620 is also provided
with user push button trim, which can
be locked during configuration if not
required. The range led indicates
out of range input during normal
operation, during user trim it is used
to indicate the stage of trim.
SPECIFICATIONS Isolation: Input to output tested at 500 Vdc Ambient: Operating -20 to 70°C (-4 to 158°F) 10 to 95% RH non-condensing Storage: -40 to 85°C (-40 to 185°F) Approvals: CE tested to BS EN 61326 Dimensions: 17.5 W x 56.4 L x 90 mm H (0.7 x 2.2 x 3.5") Material: Polmide 6.6 Self Extinguishing Terminals: Screw terminal Cable: 2.5 mm (0.1") max
TXDIN1620 Type: 3-wire voltage output with programmable ranges: 0 to 10, 0 to 5, 2 to 10, 1 to 5, and 0 to 1V Supply: 15 to 28 Vdc. 10mA max. Response Time: <500 ms to reach 95% of final value; start up time <3 s Calibration Accuracy: ±5 mV Output Drive: 2 mA driving 5 KΩ @ 10V Protection: Reverse connection and over-voltage protection, max over voltage current 100 mA User Trim: Raise and lower buttons, active for offset when output is at offset and span, trim lock option
TXDIN1630 Type: Dual form C relay contacts Supply: 24 Vdc ±5% @ 40 mA max Response Time: <500 ms to reach 95% of final value; start up time <3 s Contact Rating: 250 Vac rms @ 1 A; 30 Vdc @ 1 A resistive load Trip Type: Individual trips A and B may be set at high or low level, full range setpoint plus adjustable Ranges: Setpoint programmed on units, covering full range of input Hysteresis: Set in units Protection: Reverse connection and over-voltage protection, max over voltage current 100 mA
† All amounts shown in EUR Note: Supplied with operator’s manual. Configuration software is available for free download from the related links section below. A USB cable with mini-B plug is also required, see to-order table above to purchase.