Portable Dry Block Calibrator -25°C to 130°C

DBCL-130

New

Dry Block Temperature Calibrator -25°C to 130°C

^€4.114,67 DBCL-130

PLACE ORDER

Temperature Calibration range of -25°C to +130°C (-13°F to 266°F)
Up to eight setpoints can be stored & recalled
¼" diameter pocket for reference probe (not supplied)
Lightweight and portable for use in field, lab or industrial setting
The DBCL-130 heats up and cools down rapidly, with highly efficient insulation and internal cooling fan to ensure that the case remains safe enough to handle even at maximum operating temperatures.

Precision Calibration Equipment and Ice Point References - View related products

Description

The DBCL-130 calibrator provides a safe, dry, constant temperature source for checking and calibrating a wide range of temperature sensors, systems, indicators and thermometers. It is fast and economical and can be used either on a bench top or as a portable field unit. The weight of the unit is only 6.8 kilograms. The unit covers the temperature range from -25°C to +130°C in an ambient of 20°C using a machined aluminium block as the heat transfer medium. The temperature control circuit is built into the unit.

SPECIFICATIONS

Temperature Calibration range: -25°C to +130°C (-13°F to 266°F) at an ambient of 20°C/68°F
NOTE: the typical minimum achievable temperature is 45°C/80°F below the room ambient temperature
Display resolution: 0.1°
Accuracy: ±0.4°C (-20 to 130°C); ±0.7°F (-4 to 266°F)
Measurement Units: °C or °F
Stability (10 minutes): ±0.050°C (±0.080°F)
Heat up time -20 to 130°C: 5 minutes
Heat up time 20 to 100°C: 2 minutes
Cool down 20 to -20°C: 3 minutes (ambient of +20°C)
Cool down 130 to 20°C: 2.5 minutes
Insert well: ½" (12.7 mm) diameter x 4” (102 mm) depth
Reference well: ¼" (6.3 mm) diameter x 4” (102 mm) depth
Fan Cooling: Automatic
Power Supply:100 to 230V, 50/60 Hz, 200W
Weight: 6.8 Kg (15 lbs)
Dimensions* (H x W x D): 279 x 229 x 203 mm (11 x 9 x 8 inches) *excluding the carrying strap

Note: The above specifications are quoted for an ambient temperature range of 10°C to 30°C (50°F to 86°F). Outside this range, the quoted figures may deteriorate but the unit will still work safely within the range of 5°C to 40°C (41°F to 104°F).

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

DBCL-130

€4.114,67

Availability: 1 week

Portable Dry Block Calibrator -25°C to 130°C with insert for 1/4" dia or 6 mm probes.

Accessories

DBCL-UKCABLE

€14.13

Availability: 3 weeks

*UK Power cable for DBCL-130 Calibrator. 5 A, 2 m long

DBCL-130-3074

€190.12

Availability: 1 week

Insert to accept a 1/8” diameter probe

DBCL-130-3075

€190.12

Availability: 1 week

Insert to accept a 3/16” diameter probe

DBCL-130-3076

€190.12

Availability: 1 week

Insert to accept a 1/4” diameter probe

DBCL-130-3077

€190.12

Availability: 1 week

Insert to accept a 5/16” diameter probe

DBCL-130-3078

€190.12

Availability: 1 week

Insert to accept a 3/8” diameter probe

DBCL-3052

€455.90

Availability: 4 weeks

Soft sided carrying case with pockets for inserts

† All amounts shown in EUR
Note: Supplied with: insert well for ¼" diameter probes, operator's manual, carrying strap, well removal pick, EU and US power cables* and calibration certificate (performed and dated at time of manufacture) traceable to NIST.

*For use in the UK please purchase DBCL-UKCABLE separately