Portable 450°C Dry Block Temperature Calibrator with Multiple Well Insert

DBCL-400

Portable Dry Block Calibrator with Multiple Well Insert

^€3.135,28 DBCL-400-120

PLACE ORDER

Supplied with 115 mm (4.5") deep multi-well insert for 1/8", 3/16", 1/4", 5/16" & 3/8" diameter probes
Maximum temperature of 450°C (850°F)
Minimum temperature of 5°C (9°F) above ambient
An independent over-temperature cutout, 470°C (875°F)
Heat up time 25° C to 400°C with stability at 12 minutes
Lightweight and portable for use in field, lab or industrial setting
CE Marked and NIST-Traceable Calibration

Precision Calibration Equipment and Ice Point References - View related products

Description

The DBCL400 calibrator provides a safe, dry, constant temperature source for checking and calibrating a wide range of temperature sensors, systems, indicators and thermometers. It is fast and economical and can be used either on a bench top or as a portable field unit. The weight of the unit is only 5 kg. The unit covers the temperature range from 5°C above ambient up to 450°C using a machined aluminium block as the heat transfer medium. The temperature control circuit is built into the unit and includes over-temperature limit protection.

SPECIFICATIONS

Power Supply: 120 or 230V (specify), 50/60 HZ, 900W
Minimum Temperature Measurement: Ambient +5°C (9°F)
Maximum Temperature Measurement: 450°C (850°F)
Minimum Ambient Temperature: 5°C (9°F)
Maximum Ambient Temperature: 40°C (104°F)
Measurement Units: °C or °F

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

DBCL-400-120

€3.135,28

Availability: 9 weeks

Portable Dry Block Calibrator with Multiple Well Insert. 115 Vac powered with IEC power lead and USA style plug.

DBCL-400-240

€3.307,38

Availability: 1 week

Portable Dry Block Calibrator with Multiple Well Insert. 230 Vac powered. *Requires power cable for UK, see accessories below.

Accessories

DBCL-UKCABLE

€14.13

Availability: 3 weeks

*UK Power cable for DBCL-400-240 Calibrator. 5 A, 2 m long

DBCL-400-3043

€454.42

Availability: 1 week

Insert to accept 5 x ¼” diameter probes

DBCL-400-3044

€454.42

Availability: 4 weeks

Insert to accept 2 x ¼” and 2 x 3/8” diameter probes

DBCL-400-3045

€454.40

Availability: 4 weeks

Insert to accept 2 x ¼” and 2 x ½” diameter probes

DBCL-400-3046

€454.42

Availability: 3 weeks

Insert to accept 1 x ¼” diameter probes

DBCL-400-3047

€372.85

Availability: 1 week

Insert blank

DBCL-400-3048

€454.42

Availability: 1 week

Insert to accept 1 x 9/16” and 1 x ¼” diameter probes

DBCL-400-3049

€445.65

Availability: 1 week

Insert to accept 1 x 5/8” and 1 x ¼” diameter probes

DBCL-400-3050

€454.40

Availability: 1 week

Insert to accept 1 x 11/16” and 1 x ¼” diameter probes

DBCL-400-3051

€445.65

Availability: 1 week

Insert to accept 1 x ¾” and 1 x ¼” diameter probes

DBCL-3052

€455.90

Availability: 4 weeks

Soft sided carrying case with pockets for inserts

† All amounts shown in EUR
Note: Supplied complete with multi-well insert, well removal tool, carrying strap, operator's manual and calibration certificate (performed and dated at time of manufacture) traceable to NIST.

-120 model is also supplied with a power cable with 2-pin USA style plug.
-240 model is also supplied with a power cable with 2-pin EU style plug. *For use in the UK please order DBCL-UKCABLE separately.

Product Manuals:

Download Dry Block Temperature Calibrator