Sanitary Thermistor Probes with Cable for Clean-In-Place Applications

THS-H-CB-120 Series

Sanitary Thermistor Probes with Integral Cable

See All Models Below

1/4" Diameter Probe Design for Standard Duty, or
3/8" to 3/16" Stepped Probe Design For Heavy Duty Applications
Std. Process Connection is a 1½"-16 AMP Tri-Grip™ (Tri-Clamp® Compatible) Standard Conforming to ASME BPE-2007 to Assure Trouble-Free Interchangeability.
Sensor Can be Used in Sanitary, Hygienic and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
316L SS Wetted Surfaces with 32 µin or Better Finish
Includes 2 Conductor, #26AWG Stranded Nickel Plated Copper, PFA Insulated and Jacketed 10'' Cable with Strain Relief Standard
10kΩ (at 25°C) Thermistor Element (44006) Standard
-80 to 150°C (-112 to 302°F) temperature Range

Description

Find how Sanitary Sensors works on this link.

The OMEGA™ THS-S-CB and THS-H-CB Series Thermistor Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors are manufactured with 316L stainless steel housings that meet the dimensional requirements of the ASME BPE-2007 Standard, and are welded and processed to provide a clean, smooth, 32microinch or better surface finish in the wetted areas for easy cleaning.

In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:

Process Connection	Model Number Code
3/4"-16AMP	-B1-
1" and 1½"-16AMP	-D1-
2"-16AMP	-E1-
2½"-16AMP	-F1-
3"-16AMP	-G1-
4"-16AMP	-H1-

If you need a process connection that is not listed above, please contact our sales department for availability.

The probe stems are manufactured in two configurations; with a standard ¼" diameter probe for standard duty service, and a stepped 3/8" to 3/16" diameter probe design for good response times in heavy duty applications.

The integral cable with molded strain relief allows for easy and direct connection to your instrumentation. These sensors are also available in RTD and Thermocouple styles to accommodate any process input requirement. In addition to the standard 1½-16AMP flange design, these can be provided in a wide variety of flange sizes and styles. If you need something a little (or a lot) different, we can accommodate your needs.

This sensor is stocked with the 10,000 Ω thermistor standard, but is available in any of the following resistances:

Sensor Code	Resistance @ 25°C	Element Series
2K	2252 Ω	44004
3K	3000 Ω	44005
5K	5000 Ω	44007
10K	10,000 Ω	44006
30K	30,000 Ω	44008

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

Standard Duty ¼" Diameter Probe Design

THS-10K-S-0300-D1-CB-120

€341.07

Availability: 4 weeks

3in. Standard Duty Probe

THS-10K-S-0400-D1-CB-120

Consult Sales

Availability:

4in. Standard Duty Probe

THS-10K-S-0500-D1-CB-120

Consult Sales

Availability:

5in. Standard Duty Probe

THS-10K-S-0600-D1-CB-120

Consult Sales

Availability:

6in. Standard Duty Probe

Heavy Duty 3/8" to 3/16" Diameter Probe Design

THS-10K-H-0300-D1-CB-120

€422.28

Availability: 4 weeks

3in. Heavy Duty Probe

THS-10K-H-0400-D1-CB-120

€422.28

Availability: 4 weeks

4in. Heavy Duty Probe

THS-10K-H-0500-D1-CB-120

€422.28

Availability: 4 weeks

5in. Heavy Duty Probe

THS-10K-H-0600-D1-CB-120

€422.28

Availability: 4 weeks

6in. Heavy Duty Probe

† All amounts shown in EUR
Note:

For other than the standard 1½-16AMP process connection, change "-D1-" in the model number to the code for the alternate process connection option listed above the "To Order" table and add $20 to the price

For standard duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $1 per inch to the price (up to 24 inches).

For heavy duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $2.50 per inch to the price (up to 24 inches).

For cable lengths longer than 10' (120"), change the "-120" in model number to the desired length in inches and add $1 per foot to the price.

For probe lengths longer then 24 inches, please contact Customer Service.

Part Number Builder

Build Your Part Number Below

	(1)		(2)		(3)		(4)		(5)
THS-		-		-		-		-CB-

Option Descriptions:

(1) Thermistor Type select from:
10K for 10000 Ohms at 25C
2K for 2252 Ohms at 25C
3K for 3000 Ohms at 25C
5K for 5000 Ohms at 25C
30K for 30000 Ohms at 25C

(2) Probe Diameter select from:
S for Standard Duty 1/4 inch
H for Heavy Duty 3/8 to 3/16 inch stepped probe

(3) Probe Length select from:
0300 for 3 inch length
0400 for 4 inch length
0500 for 5 inch length
0600 for 6 inch length

(4) Sanitary Flange (Cap) Size select from:
D1 for 1-1/2 inch Tri-Grip Flange (standard)
B1 for 3/4 inch 16AMP Tri-Grip Flange
E1 for 2 inch 16AMP Tri-Grip Flange
F1 for 2-1/2 inch 16AMP Tri-Grip Flange
G1 for 3 inch 16AMP Tri-Grip Flange
H1 for 4 inch 16AMP Tri-Grip Flange

(5) Lead Wire Cable Length select from:
120 for 120 inch/10 ft (standard)
144 for 144 inch/12 ft
180 for 180 inch/15 ft
240 for 240 inch/20 ft

Note: All combinations may not be valid, check spec sheet for valid part numbers.

Related Products:

RSC and RSCM Series