In-Head Mount RTD pt100 transmitter with 4-20ma output

TX12

^€97,08 TX12

PLACE ORDER

Pt100 transmitter with a 4-20mA Output. Loop Powered
Unique Push Button Configuration = Simple Setup without a PC
Re-configure in Seconds
User Trim for Nulling Sensor Error
LED Sensor Fail Indicator
Programmable Sensor Burn-Out
High Stability

Description

The TX12 is a low cost head mounted pt100 4-20 mA transmitter that accepts RTD temperature sensors and converts sensor output over a selected range into a 4 to 20 mA transmission signal. The transmitter is a two-wire, loop-powered device, and is fully configurable by the user, over a wide temperature range, with the aid of a simple push button. This new TX12 design incorporates additional configuration menus, allowing the user to push button trim the transmitter output at both zero and span, ideal for trimming out sensor errors. The transmitter's advanced circuitry ensures high stability over the wide operating ambient temperature ranges experienced by head mounted devices. One of the transmitter's features is the program LED, which provides visual indication of sensor fault when in normal operation and is also used to guide the operator through the simple menus during configuration.

Supplied as standard with scaling of 4mA at 0°C and 20mA at 100°C

**Specifications**
Sensor Type: Pt100 100Ω @ 0°C 2 or 3 Wire Sensor Range: -200 to +850°C Sensor Connection: Screw terminal Minimum Span: 25°C Linearisation: BS EN 60751(IEC 751) standard/JISC 1604 Measurement Accuracy: 0.1°C ±0.05% of reading Thermal Drift: 25 ppm/°C Excitation Current: <200 uA Lead Resistance Effect: 0.002°C/Ω Maximum Lead Resistance: 20Ω per leg Output Type: 2 wire, 4 to 20 mA Output Connection: Screw terminal Maximum Output: 21.5 mA (in high burnout condition) Minimum Output: 3.8 mA (in low burnout condition) Accuracy: (mA output /2000) or 5 uA (whichever is the greater) Loop Voltage Effect: 0.2 uA/V Thermal Drift: 1 uA /°C Maximum Output Load: [(Vsupply-10)/20]kΩ (Example: 700Ω @ 24V)	General: Update Time: 500 mS Response Time: 1 second Start Up Time: 4 seconds (I out < 4 mA during start up) Warm-Up Time: 1 minute to full accuracy Power Supply: 10 to 30 Vdc Environmental: Ambient Operating Range: -40 to +85°C Ambient Storage Temperature: -50 to +90°C Ambient Humidity Range: 10 to 90% RH non condensing

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

TX12

€97,08

Availability: In Stock

Pt100 Temperature Transmitter

Accessories

TX2-100

€44.53

Availability: 7 weeks

2 core screened cable, 30 metre reel

† All amounts shown in EUR
Ordering Example: (1) TX12 Pt100 temperature transmitter, €97.08 plus (1) TX2-100 screened instrument cable, 2 core, 30 metre reel, €44.53, €97.08 + 44.53 = €141.61